LOGO 200 Bind&Fly Combo, neon-yellow/blue

Item no.:  05384
LOGO 200 Bind&Fly Combo, neon-yellow/blue - Image 1
LOGO 200 Bind&Fly Combo, neon-yellow/blue - Image 2
LOGO 200 Bind&Fly Combo, neon-yellow/blue - Image 3
LOGO 200 Bind&Fly Combo, neon-yellow/blue - Image 4
LOGO 200 Bind&Fly Combo, neon-yellow/blue - Image 5
LOGO 200 Bind&Fly Combo, neon-yellow/blue - Image 1LOGO 200 Bind&Fly Combo, neon-yellow/blue - Image 2LOGO 200 Bind&Fly Combo, neon-yellow/blue - Image 3LOGO 200 Bind&Fly Combo, neon-yellow/blue - Image 4LOGO 200 Bind&Fly Combo, neon-yellow/blue - Image 5
4033912053846
449,00 EUR
incl. VAT and excl. shipping
Total amount: {{ totalPrice }} EUR
currently not available
This item notice Article is noted
Availability: (Delivery time: )
  • Description
  • Video
  • Download

LOGO 200 

  • BNF-RTF Micro Helicopter for VBar Control radio (bind and fly, ready to fly)
  • Exceptional flight performance, comparable to larger 600-700 class helis
  • Equally suitable for sports flying, aerobatics and 3D flying
  • Wide range of head speeds, from 2,500-7000+ 1/min possible
  • Lipo 3S-650 mAh battery for flight times from 4-9 min. (included)
  • Dual Motor System, direct drive for main and tail rotor
  • Dual ESC with metal case
  • VBar NEO micro 6.4 Flybarless System with Beginner Mode, Rescue-Bailout, 'Anti Gravity'
  • VBar NEO already set up, no setup on your own required, just bind and fly
  • VBar NEO Governor with RPM telemetry
  • Micro digital servos with metal gears for the swashplate
  • Carbon frame and landing gear
  • Aluminum rotor head and swashplate
  • VTX main rotor blades
  • Glass Fiber Airbrush canopy

This LOGO 200 does not support other radio systems than VBar Control, without further adjustments.
At your own discretion, you can use VBar Control to select a digital third party protocol as an input, and make the necessary channel adjustments.
You then obviously also need a suitable separate third party receiver.
Adjustments to the flight parameters can only be made with VBar Control. VBar NEO mini can not be set up via computer software.
If set up properly, you can then fly the model with VBar's motor switch logic, three parameter banks, and use Rescue and/or Beginner mode (if installed).

Specifications Helicopter
Rotor diameter 400 mm
Rotor blades VTX 173 mm
RTF weight approx. 310 g
recommended batterie Lipo 3S-650 mAh (included)
Main gear ratio 1
Tail gear ratio 1
Main Gear size ./.
Length 420 mm
Hight 135 mm
Width 74 mm
Content
Kit LOGO 200 Super Combo ARF
Motors OMPHOBBY
ESC OMPHOBBY
VBar electronic VBar NEO micro VLink Pro+Rescue
Servos 3 x digital micro servo w/ metal gears, OMPHOBBY
Blades VTX 173 mm
Tail Blades 71 mm
Canopy Airbrush canopy